Now you can add a Cobalt connector — up to 8 pins! — to your own cable. Perfect for ROV tethers, battery cables, thruster cables, etc.
The Cable Termination Kit is available in four different pin counts (3-pin, 4-pin, 6-pin, and 8-pin) and two different connector shell sizes (regular and large).
Your cable must have a bondable jacket (preferably polyurethane) and have a diameter no larger than 6.0 mm for the regular size connector shell or 7.8 mm for the large size connector shell.
These Termination Kits are similar to the Thruster Cable Termination Kit, but the termination procedure has been changed to accommodate any pin count. The termination procedure requires the appropriate Cable Termination Tool (sold separately).
The kit includes:
- qty. 1. Connector Shell (regular or large)with pre-installed PEEK Insert
- qty. 1 Connector Insert with pre-installed electrical sockets (3-pin, 4-pin, 6-pin, or 8-pin)
- qty. 1 Locking Sleeve
- qty. 1 #012 O-Ring
Requires intermediate soldering skills as well as familiarity with potting techniques. Does not include potting material (we recommend 3M DP-420 or DP-620). Please read the Instructions in the DOWNLOADS tab for further detail.